Wall Tile Backer Board

Our company's Wall Tile Backer Board has undergone numerous international professional tests and fully complies with national standards. All performance parameters are stable and reliable, meeting the requirements of building projects in various countries.

Waterproofing Performance: Extremely low water absorption rate, excellent impermeability and moisture penetration resistance, can continuously block groundwater vapor and high-humidity water vapor in the air for a long time, and will not deform even in ambient  temperatures ranging from -30℃ to +75℃;
Mechanical Strength: The Wall Tile Backer Board has high bending strength, compressive strength, and impact resistance, and will not be damaged by daily collisions, wall vibrations, or construction pressure. Users can use it with confidence.

Wall Tile Backer Board are primarily used for construction and insulation purposes. Here are some common applications:

1. Underfloor Heating – Provides thermal insulation beneath underfloor heating systems, preventing heat loss and improving efficiency.

2. Wet Room & Bathroom Insulation – Used as a water resistant and thermal insulating layer in wet rooms, showers, and bathrooms.

3. Wall & Floor Insulation – Acts as an effective thermal barrier in walls and floors to improve energy efficiency.

4. Tile Backer Board – Serves as a strong, water resistant substrate for tiling in bathrooms and kitchens.

Aswell as the above the Wall Tile Backer Board can be used internal and externally. The Boards can be finished with paint, plaster and most commonly tiles.

The installation of Wall Tile Backer Board is very simple and standardized, requiring no complicated professional skills or auxiliary materials. The entire process is clean, efficient, and quick. The main installation steps are as follows: First, level the base surface to ensure the wall is flat and free of dust. Then, fix the joists or directly fix it to the existing wall. Use a utility knife to cut the Wall Tile Backer Board to the required size, ensuring it is dust-free. Use corrosion-resistant and waterproof screws to fix the product to the wall. Use special waterproof tape and waterproof sealant to seal all joints and screw holes, forming a completely sealed, waterproof, and moisture-proof whole. After the surface has dried naturally, use tile adhesive to install wall tiles, and the construction is complete.

Bathrooms have always been a challenge for cleaning, especially in older homes. Shower area tiles often bulge, grout lines turn black and moldy, and after tile removal, plasterboard becomes soaked and crumbles easily. Wooden joists also become moldy and blackened. Ordinary plasterboard, when exposed to moisture for extended periods, powders and molds, rots the joists, causes tiles to become hollow and fall off, and can even leak to the floor below. Many homeowners, when renovating their old homes, use Wall Tile Backer Board, sealing the board seams and screw holes with waterproofing before tiling. Even after 5 years, there have been no leaks, no mold, the tiles are firmly in place, and there are no leaks downstairs, completely solving the problem of "water damage and mold."